An NTC thermistor decreases in resistance as temperature rises. Its nonlinear curve can be approximated using a beta parameter and a reference resistance.
An NTC thermistor decreases in resistance as temperature rises. Its nonlinear curve can be approximated using a beta parameter and a reference resistance.
1. Set up the experiment
Adjust temperature around 25 °C. Compare resistance and divider voltage; note that equal temperature changes do not give equal resistance changes.
2. Connect the result to the equation
R(T) = R25 exp[B(1/T − 1/298.15)]
Change one parameter at a time and keep the others fixed. Read the signed output and current, then use the curve to distinguish a steady relationship from a changing transient.
Initial supply
5.00 V
Initial current
0.455 mA
Initial output
0.455 V
3. Notice the limits
Temperature must be expressed in kelvin in the beta equation. The model ignores self-heating, tolerance and thermal lag.
Circuit reference diagram
Continue this learning path
About the Electronics 101 Simulation
Are these circuit simulations exact?
They are analytic teaching models: ideal sources and switches, fixed diode drops, simple BJT gain and saturation, exponential RC behavior, and illustrative sensor curves. They are not a SPICE solver or construction verification.
Do I need hardware or a login?
No hardware or account is needed. The 3D view needs WebGL, while diagrams, controls and static lessons remain available as alternatives. Progress is stored in this browser and can be exported.
Which current direction is shown?
Moving markers represent conventional current, not electron drift. Their motion is illustrative and is not a measurement of charge velocity.
Model references and scope
These lessons use standard lumped-circuit relationships and explicitly simplified component models. Diagrams explain teaching topologies, while the breadboard probe explains socket continuity. The workbench is not a verified physical assembly plan.