A voltmeter reads potential difference across two points. An ammeter reads current through a path and must be inserted in series.
1. Set up the experiment
Change the meter mode between voltage, current and resistance. Compare its displayed unit and the illustrated connection.
2. Connect the result to the equation
V_meter = V; I_meter = V/R; Ω_meter = R (unpowered)
Change one parameter at a time and keep the others fixed. Read the signed output and current, then use the curve to distinguish a steady relationship from a changing transient.
Initial supply
3.00 V
Initial current
100.000 mA
Initial output
3.000 V
3. Notice the limits
The model uses ideal meters. A real ammeter connected directly across a battery can create a short; resistance measurements are made on an unpowered isolated part.
Circuit reference diagram
Continue this learning path
About the Electronics 101 Simulation
Are these circuit simulations exact?
They are analytic teaching models: ideal sources and switches, fixed diode drops, simple BJT gain and saturation, exponential RC behavior, and illustrative sensor curves. They are not a SPICE solver or construction verification.
Do I need hardware or a login?
No hardware or account is needed. The 3D view needs WebGL, while diagrams, controls and static lessons remain available as alternatives. Progress is stored in this browser and can be exported.
Which current direction is shown?
Moving markers represent conventional current, not electron drift. Their motion is illustrative and is not a measurement of charge velocity.
Model references and scope
These lessons use standard lumped-circuit relationships and explicitly simplified component models. Diagrams explain teaching topologies, while the breadboard probe explains socket continuity. The workbench is not a verified physical assembly plan.