A diode is a direction-sensitive nonlinear device. A simple silicon model blocks reverse current and has an approximate forward drop when conducting.
1. Set up the experiment
Compare DC polarity reversal with an AC input. Watch the load receive only the positive half-cycles in the half-wave model.
2. Connect the result to the equation
V_out ≈ max(0, V_in − 0.7 V)
Change one parameter at a time and keep the others fixed. Read the signed output and current, then use the curve to distinguish a steady relationship from a changing transient.
Initial supply
0.00 V
Initial current
0.000 mA
Initial output
0.000 V
3. Notice the limits
A fixed 0.7 V drop is a useful approximation over a limited range. Real diode curves, leakage and breakdown are more complex.
Circuit reference diagram
Continue this learning path
About the Electronics 101 Simulation
Are these circuit simulations exact?
They are analytic teaching models: ideal sources and switches, fixed diode drops, simple BJT gain and saturation, exponential RC behavior, and illustrative sensor curves. They are not a SPICE solver or construction verification.
Do I need hardware or a login?
No hardware or account is needed. The 3D view needs WebGL, while diagrams, controls and static lessons remain available as alternatives. Progress is stored in this browser and can be exported.
Which current direction is shown?
Moving markers represent conventional current, not electron drift. Their motion is illustrative and is not a measurement of charge velocity.
Model references and scope
These lessons use standard lumped-circuit relationships and explicitly simplified component models. Diagrams explain teaching topologies, while the breadboard probe explains socket continuity. The workbench is not a verified physical assembly plan.